Mounting and processing of the magnesite plate in construction and repair

Installation of manganite plates.

The mounting of the magenite plates is carried out in the same way as gypsum boards and wood sheets.

Processing of a makhnezitovy plate.

Cutting of the manganite plate.
Cutting of plates can be made in the usual conditions which are not demanding the specialized equipment. When cutting by hand, a large amount of dust is not released, therefore there is no need to use dust extraction devices.

Drilling with magnezitovoy plate.
For drilling holes do not require the use of drills for metal and with pobeditovye tips.

Connecting the lead plate with screws.
To fix the ferrous plates no pre-drilling of the holes in the slabs is required. Screws are used, designed for gypsum boards (for the installation of plates with a thickness of 3-6 mm, the use of self-tapping screws with a notch for cutting is recommended, in order to avoid the appearance of cracks).

Bonding and painting of magense plates.
Glue and paint used with any decorative materials are used for painting and gluing of forever plates. The paint is applied in one or several layers, taking into account the type of paint and the wishes of the customer, on a dry surface of the plate covered with soil.

Laminating magenzovyh plates.
Manganite plates can be laminated with PVC, paper, wood, and other materials (the deadline for special order, depending on the complexity, is up to three months). When carrying out finishing works in the room, preference is given to the use of glass and vinyl wallpaper. In this case, after the technological joints are filled with the plaster mixture and the surface is treated with primer, the surface is coated with wallpaper.

Plaster and facing of magnesite plates.
The plaster mortar and ceramic tiles are easy to place on the surface of the ferrous plate.